MK2007CBM-CN-type external alarm display and tester Shenzhen Technology Sales Heino BENDER Bender and independent Advantech SZHINO-5 remote alarm terminal. - Digital display insulation resistance and load conditions - Buzzer sound alarm and mute button - RS485 Interface - Chinese panels - Waterproof panels are easy to clean 3.1 real-time monitoring isolation transformer load conditions and the temperature of the transformer winding. 3.2 a (green) lights that work properly; When the insulation resistance drops to lowest setting when a (yellow) lights. This should not be eliminated or disconnect indication lights; When the insulation resistance drops to lowest setting, the audio alarm action. Sound the alarm panel can be lifted; When the fault is cleared to return to normal, (yellow) color signal should be extinguished. Deep Heino medical technology to provide cost-effective IT isolated power systems (health IT systems) SZHINO-1 package of insulation monitoring alarm systems include: ES710 ES0107 107TD47 isolation transformer insulation Monitor instrument power transformer STW2 AN450 remote alarm terminal MK2007CBM-CN. MK2430 isolated power systems for healthcare IT operating room should meet the following requirements and national standards: isolation transformer, insulation monitoring device, current transformers, instrument dedicated power supply, external alarm display and test unit. System has a strong anti-jamming capability. 1 GB 16895.24-2005/IEC60364-7-710 isolated power system to meet the standard. 2, medical isolation transformers comply with IEC61558-2-15 standard. 3, insulation monitoring alarm system meets IEC61557-8 standard. 4, isolated power system real-time monitoring of the insulation condition, according to the need to set different alarm response. 5, real-time monitoring isolation transformer load conditions and the temperature of the transformer windings 6, real-time monitoring of each isolated power system components and system ground wiring condition. 7, real-time display isolated power systems power load percentage, system insulation resistance. 8. Measurement method using adaptive pulse signal is detected, the system in order to improve the detection of anti-jamming capability.